跳至主要内容

ASME SA335 P22 elbow

ASME SA335 P22 elbow
ASME SA335 P22 elbow
ASME SA335 P22 elbow
Mark

ASTM A335 P22 elbow is produced by ASTM A335 standard, used to be installed between two lengths of pipe or tube allowing a change of direction.

Inner
2.5" STD ASTM A335 P22 90 deg. Short radius elbow

We supply a full range of ASTM A335 P22 elbow schedules ranging from SCH 5 thru Double Extra Heavy, we deliver ASTM A335 P22 elbow with Exceptional sizes & Quality.

Sunny Steel is the most acclaimed manufacturer, exporter, distributor and supplier of industrial ASTM A335 P22 elbow with required test certificates. You can also Order small quantities, we will be happy to quote best price for small and large quantities & can typically deliver the ASTM A335 P22 elbow in minimum time frame anywhere around the globe.

ASTM A335 P22 elbow is used to be installed between two lengths of pipe or tube allowing a change of direction, usually these carbon steel elbows distinguished by connection ends. The ends may be machined for butt welding , threaded , or socketed , so the carbon steel elbows are consist of butt weld, thread elbow socket elbow and other series. The material is selected according to the application use such as high temperature use, sanitary fitting, regular industrial use etc.

ASME SA335 P22 elbow
Paint


An elbow is a pipe fitting installed between two lengths of pipe or tubing to allow a change of direction, usually a 180° or 90° angle, though 45° elbows are also made. The ends may be machined for butt welding (SW) or socketed welding(SW) etc.

Most elbows are available in short radius or long radius variants. When the two ends differ in size, the fitting is called a reducing elbow or reducer elbow.

Elbows are categorized based on various design features as below:

Size range:

Elbow Size

Recommended type of pipe elbows:

Materials

  • Carbon steel: ASTM/ASME A234 WPB-WPC
  • Alloy steel: --WP 22-WP 5-WP 91-WP 911
  • Low temperature steel: ASTM/ASME A402 WPL 3-WPL 6
  • High performance steel: ASTM/ASME A860 WPHY 42-46-52-60-65-70
  • Stainless steel: ASTM/ASME A403 WP 304-304L-304H-304LN-304N
    • ASTM/ASME A403 WP 316-316L-316H-316LN-316N-316Ti
    • ASTM/ASME A403 WP 321-321H ASTM/ASME A403 WP 347-347H

Abrasion resistant elobw

SHS-self-propagating ceramic composite steel pipe and fittings, the new generation of wearable and corrosion resistant engineering pipeline, belongs to "863" Hi-tech Plan products.

It is the ideal wearable and corrosion resistant engineering pipeline, with wear resistance 15 times higher than common steel pipe, smooth inner surface, and favorable liquor resistance.

Pipe elbows

Butt Weld Pipe Fitting Bevel

  • All welded pipe fittings have bevelled end to allow for ease of welding.
  • This bevel allows for full penetration weld in most cases.
  • There are two types of bevels;
    Plain Bevel and Compound Bevel: according to the bevel of welding pipe fittings construction .
  • ASME B16.28, Buttwelding Short Radius Elbows and Returns
Industrial Processes: Bending, squeezing, pressing, forging, machining and more ANSI/ASME B16.25, Buttwelding Ends 
ANSI/ASME B16.25 Standard covers the preparation of butt welding ends of piping components to be joined into a piping system by welding.

Application of pipe elbows:

Petroleum, chemical, power, gas, metallurgy, shipbuilding, construction, etc.

ELL & ELLS

  • A wing of a building at right angles to the main structure.
  • A right-angled bend in a pipe or conduit; an elbow.
标签：

此博客中的热门博文

Duplex Stainless Steel Round Bar

Duplex stainless steel round bar is downstream processed to seamless pipe, fitting, flange, shaft, pump valve, member bar and so on, the final products are widely used in LNG liquefied natural gas, chemicals, ocean industry, petrochemical engineering and some high-end industries. 022Cr22Ni5Mo3N duplex stainless steel is a kind of ferrite to austenite stainless steel, belong to the second generation of duplex stainless steel in the alloy. In the early 1980 s, our country began to develop and 022Cr22Ni5Mo3N  duplex stainless steel is 00 cr22ni5mo3n duplex stainless steel, the microstructure of ferrite and austenite F A each account for about 50%. It combines ferrite and austenite is the most useful performance: ferrite phase steel has high strength and resistance to chloride stress corrosion performance, austenitic phase steel has good toughness and corrosion resistance. S31803, therefore, has the very good resistance to chloride stress corrosion cracking, are better than ferritic st...
阅读全文

ASTM A335 P22 alloy steel pipe

ASTM A335 P22 is the part of ASTM A335. ASTM A335 P22 alloy steel pipe shall be suitable for bending, flanging, and similar forming operations, and for fusion welding. Each length of pipe shall be subjected to the hydrostatic test. Also, each pipe shall be examined by a non-destructive examination method in accordance to the required practices. Inspection and Test: Ultrasonic inspection of seamless pipes Chemical Composition Inspection, Mechanical Properties Test(Tensile Strength,Yield Strength, Elongation, Flaring, Flattening, Bending, Hardness, Impact Test), Surface and Dimension Test,No-destructive Test, Hydrostatic Test. Surface treatment: Oil-dip, Varnish, Passivation, Phosphating, Shot Blasting. Both ends of each crate will indicate the order no., heat no., dimensions, weight and bundles or as requested. A335 is often called chrome moly pipe because of the chemical makeup of Molybdenum (Mo) and Chromium (Cr). Molybdenum increases the strength of steel as well as the elastic limit...
阅读全文

Alloy steel pipes stock

Alloy steel pipe is a kind of seamless steel pipe, its performance is much higher than the general seamless steel pipe, because this steel pipe inside containing Cr, high temperature resistance, low temperature, corrosion-resistant performance of other non-pipe joints not match, so the more extensive use of alloy tube in the petroleum, aerospace, chemical, electric power, boiler, military, and other industries. ASTM A335 P5 ASTM A335 P91 ASTM A335 P22 The main use of alloy steel pipe used in power plants, nuclear power, high-pressure boiler, high temperature superheater and re-heater high pressure and high temperature piping and equipment, it is made ​​of high quality carbon steel, alloy structural steel and heat-resistant stainless steel material, hot-rolled (extrusion, expansion) or cold-rolled (pull) made​​. Small outer diameter alloy steel tube Alloy pipes for high pressure service Large diameter alloy steel pipes Backed by a team of professionals and sound production unit, we have...
阅读全文

此博客中的热门博文

Duplex Stainless Steel Round Bar

Duplex stainless steel round bar is downstream processed to seamless pipe, fitting, flange, shaft, pump valve, member bar and so on, the final products are widely used in LNG liquefied natural gas, chemicals, ocean industry, petrochemical engineering and some high-end industries. 022Cr22Ni5Mo3N duplex stainless steel is a kind of ferrite to austenite stainless steel, belong to the second generation of duplex stainless steel in the alloy. In the early 1980 s, our country began to develop and 022Cr22Ni5Mo3N  duplex stainless steel is 00 cr22ni5mo3n duplex stainless steel, the microstructure of ferrite and austenite F A each account for about 50%. It combines ferrite and austenite is the most useful performance: ferrite phase steel has high strength and resistance to chloride stress corrosion performance, austenitic phase steel has good toughness and corrosion resistance. S31803, therefore, has the very good resistance to chloride stress corrosion cracking, are better than ferritic st...
阅读全文

ASTM A335 P22 alloy steel pipe

ASTM A335 P22 is the part of ASTM A335. ASTM A335 P22 alloy steel pipe shall be suitable for bending, flanging, and similar forming operations, and for fusion welding. Each length of pipe shall be subjected to the hydrostatic test. Also, each pipe shall be examined by a non-destructive examination method in accordance to the required practices. Inspection and Test: Ultrasonic inspection of seamless pipes Chemical Composition Inspection, Mechanical Properties Test(Tensile Strength,Yield Strength, Elongation, Flaring, Flattening, Bending, Hardness, Impact Test), Surface and Dimension Test,No-destructive Test, Hydrostatic Test. Surface treatment: Oil-dip, Varnish, Passivation, Phosphating, Shot Blasting. Both ends of each crate will indicate the order no., heat no., dimensions, weight and bundles or as requested. A335 is often called chrome moly pipe because of the chemical makeup of Molybdenum (Mo) and Chromium (Cr). Molybdenum increases the strength of steel as well as the elastic limit...
阅读全文

Alloy steel pipes stock

Alloy steel pipe is a kind of seamless steel pipe, its performance is much higher than the general seamless steel pipe, because this steel pipe inside containing Cr, high temperature resistance, low temperature, corrosion-resistant performance of other non-pipe joints not match, so the more extensive use of alloy tube in the petroleum, aerospace, chemical, electric power, boiler, military, and other industries. ASTM A335 P5 ASTM A335 P91 ASTM A335 P22 The main use of alloy steel pipe used in power plants, nuclear power, high-pressure boiler, high temperature superheater and re-heater high pressure and high temperature piping and equipment, it is made ​​of high quality carbon steel, alloy structural steel and heat-resistant stainless steel material, hot-rolled (extrusion, expansion) or cold-rolled (pull) made​​. Small outer diameter alloy steel tube Alloy pipes for high pressure service Large diameter alloy steel pipes Backed by a team of professionals and sound production unit, we have...
阅读全文

ASTM A335 P22 pipes

ASTM A335 Pipe (ASME S/A335, Chorme-Moly) is a seamless ferritic Alloy-Steel Pipe for high temperature service. ASTM A335 P22 Seamless Steel Pipes shall be suitable for bending, flanging, and similar forming operations, and for fusion welding. Each length of pipe shall be subjected to the hydrostatic test. Also, each pipe shall be examined by a non-destructive examination method in accordance to the required practices. The range of ASTM A335 P22 Seamless Steel Pipes steel pipe sizes that may be examined by each method shall be subjected to the limitations in the scope of the respective practice. The different mechanical test requirements for pipes, namely, transverse or longitudinal tension test, flattening test, and hardness or bend test are presented. Both ends of each crate will indicate the order no., heat no., dimensions, weight and bundles or as requested. Spec Grade O.D. W.T. Pcs Weight T Length(M) ASME / ASTM 10CrMo910/T22/P22 16.00 3.00 168 1.301 8-12 ASME / ASTM 10CrMo910/T22...
阅读全文

Mark on ASTM A213 T91 tubes

ASTM A213 T91 Standard covers seamless ferritic and austenitic steel boiler, superheater, and heat-exchanger tubes. We are one of the leading Manufacturers, Supplier and Exporters of high quality ASTM A213 T91 Alloy Steel Seamless Tube. These tubes are widely used in various application industry such as Oil & Gas, Power, Fertilizers, Heat-Exchangers, Paper & Pulp, pharmaceuticals, Chemicals, Water Treatment, Dairy etc.
阅读全文

ASTM A213 T91 Seamless alloy tube

ASTM A213 T91 is the part of ASTM A213 Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, Heat-Exchanger Tubes.
阅读全文

ASTM A335 P91 for High Temperature Service

阅读全文

ASTM A335 P9 alloy steel pipe

ASTM A335 P9 Alloy steel pipe apply to petroleum, chemical industry, electric power, boiler, high temperature resistant, low temperature resistant, corrosion resistant. ASTM A335 P9 is the part of ASTM A335, The pipe shall be suitable for bending, flanging, and similar forming operations, and for fusion welding. The steel material shall conform to chemical composition, tensile property, and hardness requirements. The range of ASTM A335 P9 alloy steel pipe sizes that may be examined by each method shall be subjected to the limitations in the scope of the respective practice. Each length of pipe shall be subjected to the hydrostatic test. Also, each pipe shall be examined by a non-destructive examination method in accordance to the required practices. The different mechanical test requirements for pipes, namely, transverse or longitudinal tension test, flattening test, and hardness or bend test are presented.Both ends of each crate will indicate the order no., heat no., dimensions, weigh...
阅读全文

ASTM A335 P91 Alloy pipe

ASTM A335 Grade P91 pipe is premium grade pipe applied for high pressure boiler.  And P91 pipe is ideal when it comes to bending, flanging or when it is used in similar operations such as welding. The material of steel should stick to the composition of chemicals, tensile property and the requirements of hardness. ASTM A335 P91 alloy steel pipe and high pressure boiler pipes are the two variants available and the range is dependent based on the size, which is solely based on the usage. The length of the pipe will be subject to hydrostatic test and there will also be a non-destructive examination based on the specifications. ASTM A335 P91 high pressure semaless boiler pipe, The range of ASTM A335 P91 seamless alloy steel pipe sizes that may be examined by each method shall be subjected to the limitations in the scope of the respective practice. Steel grade: ASTM A335 P91 Outer Dimensions: 19.05mm – 114.3mm Wall Thickness: 2.0mm – 14 mm Length: max 16000mm Each length of pipe shall b...
阅读全文

ASTM A335 P92 High pressure boiler pipes

ASTM A335 P92 is the part of ASTM A335, The pipe shall be suitable for bending, flanging, and similar forming operations, and for fusion welding. The steel material shall conform to chemical composition, tensile property, and hardness requirements. ASTM A335 P92 high pressure semaless boiler pipe, The range of ASTM A335 P92 seamless alloy steel pipe sizes that may be examined by each method shall be subjected to the limitations in the scope of the respective practice.  Each length of pipe shall be subjected to the hydrostatic test. Also, each pipe shall be examined by a non-destructive examination method in accordance to the required practices. The range of ASTM A335 P92 pipe sizes that may be examined by each method shall be subjected to the limitations in the scope of the respective practice. The different mechanical test requirements for pipes, namely, transverse or longitudinal tension test, flattening test, and hardness or bend test are presented.Both ends of each crate will i...
阅读全文